Bright modern UK living room with fresh light beige wall-to-wall carpet

How Much to Carpet a 3-Bed House UK: 2026 Costs

Carpeting a whole house is one of those jobs where the quote can vary wildly — one fitter says £1,500, another says £4,000, and both sound confident. In fact, carpet cost depends on four things: the carpet itself, the underlay, the fitting labour, and how much floor area you actually have. This guide breaks down what a 3-bed house typically costs in the UK, room by room, so you can budget with confidence.

How Much Does It Cost to Carpet a 3-Bed House?

As a rough guide, carpeting a typical UK 3-bed house (around 60–80m² of carpeted floor, usually bedrooms, living room, stairs, landing and hall) typically costs £1,500–£3,500 supplied and fitted. That range covers:

  • Budget (£1,200–£1,800): basic polyester carpet, standard underlay, straightforward rooms. Fine for rentals or short-term fixes.
  • Mid-range (£1,800–£2,800): decent stain-resistant carpet, good underlay, professional fitting including stairs. The sweet spot for most family homes.
  • Premium (£2,800–£4,500+): wool or wool-blend carpet, luxury underlay, complex stairs and landings. Built to last 10–15 years.

However, these are hedged UK averages — London and the South East run higher, and awkward layouts cost more. For context on whole-home flooring decisions, see our complete flooring guide.

Cost by House Size: 2-Bed, 3-Bed and 4-Bed

In summary, the 3-bed figures above are the middle case. Smaller and larger homes scale roughly with floor area — but carpet grade still matters more than house size, so the ranges overlap. Rough guide, supplied and fitted:

House size Typical carpeted area Budget Mid-range Premium
2-bed house 45–60m² £1,100–£1,500 £1,400–£2,100 £2,100–£3,200
3-bed house 60–80m² £1,200–£1,800 £1,800–£2,800 £2,800–£4,500+
4-bed house 75–100m² £1,500–£2,200 £2,200–£3,500 £3,500–£5,500

The 2-bed and 4-bed ranges are scaled from the 3-bed figures above and checked against published UK guides — a 4-bed house often has a second staircase or a larger landing, which pushes the price up. If you are carpeting the whole house, ask for one all-in figure rather than per-room quotes: fitters usually sharpen the price on whole-house jobs, and you avoid paying the minimum call-out several times over.

Carpet Cost Per Room

Most fitters price per square metre, but thinking room-by-room helps you budget. Typical UK room sizes and mid-range supplied-and-fitted costs:

Freshly carpeted main bedroom with neutral beige carpet in a UK three-bedroom house
  • Master bedroom (12–14m²): typically £350–£550
  • Second/third bedrooms (9–11m² each): typically £280–£450 each
  • Living room (18–22m²): typically £500–£800
  • Stairs and landing (8–12m² including wastage): typically £350–£600 — stairs are fiddly, so labour is higher per m²
  • Hall (5–8m²): typically £150–£300

The stairs deserve a special mention: they need more carpet than their floor area suggests (wastage on cuts), take longer to fit, and wear hardest — do not economise here.

Stairs and Landing: What They Add

Stairs are the most expensive part of a carpet job per square metre, and the easiest to underestimate. A straight flight typically costs £180–£300 for carpet, underlay and fitting, and stairs and landing together usually add £350–£600 to a whole-house quote (as in the per-room list above). Three things push the price up: wastage, because each tread needs extra carpet for the cut and fold; time, because a fitter works far slower on stairs than on open floor; and wear, because stairs take the heaviest traffic in the house, so cheap carpet shows its age fastest here. Winding stairs, open risers and bullnose steps cost more still — get them measured in person rather than estimated over the phone.

What Affects the Price?

  • Carpet material: the biggest lever. Budget polyester starts around £5–£10/m² supplied; decent polypropylene/nylon blends run £12–£25/m²; wool starts around £25/m² and climbs past £50/m² for premium weaves.
  • Underlay: often underestimated. Basic foam underlay adds a few pounds per m²; quality PU or rubber underlay (£5–£10/m²) transforms how carpet feels and lasts. Skimping here is a false economy.
  • Fitting labour: typically £3–£7/m², more for stairs. A good fitter is worth it — badly stretched carpet wrinkles within months.
  • Extras: old carpet uplift and disposal (£1–£3/m²), gripper rods and door thresholds (usually included in quotes, but check), furniture moving (£20–£50/room), and door trimming if the new carpet is thicker.
  • Location: expect to pay 15–30% more in London and the commuter belt than in the North or Midlands.

Carpet Cost Per m² by Grade

For example, comparing quotes is easier per square metre. Typical UK ranges:

Grade Carpet only, per m² Supplied + fitted, per m² (with underlay)
Budget polyester £5–£10 £15–£25
Mid-range blend (polypropylene / nylon) £12–£25 £25–£40
Wool / wool blend £25–£50+ £40–£70+

The all-in figure is the one to compare between quotes — a cheap per-m² carpet price means little if underlay and fitting are charged separately at the top of their ranges. Our laminate flooring cost per m² fitted guide shows how fitters break a per-m² quote down.

Fitting-Only Costs: What Fitters Charge

If you buy the carpet yourself — end-of-roll, a retailer’s sale, or carpet you already own — you only pay for fitting. Fitting-only labour typically runs £3–£7/m², with a minimum call-out (often £40–£60) that makes small jobs dearer per metre. That usually includes stretching, gripper rods and door bars; underlay, uplift of old carpet (£1–£3/m²) and furniture moving are normally extra. Get the quote itemised the same way as a supply-and-fit quote so you can compare honestly — and check whether the fitter’s warranty covers carpet they did not supply.

Carpet vs Hard Flooring: Which for a 3-Bed?

Whole-house carpet typically costs less upfront than whole-house hard flooring (laminate or LVT fitted runs higher per m² installed), but carpet needs replacing sooner — 7–10 years for mid-range versus 15–25 for LVT. Carpet wins on warmth, noise and comfort (huge for bedrooms and stairs); hard floors win on durability and cleaning. As a result, many UK families split the difference: carpet upstairs, hard floor downstairs. Our carpet vs hard floor in the bedroom guide digs into that specific decision. If you are weighing hard floors instead, compare LVT vs laminate flooring and engineered vs solid wood flooring before you decide.

How to Save Money Without Regretting It

  • Prioritise underlay over carpet: a mid-range carpet on great underlay outlasts and out-feels a premium carpet on cheap foam.
  • Do the prep yourself: uplift old carpet, move furniture and clear rooms — fitters charge for all of it.
  • Carpet the stairs properly: this is the worst place to cut corners; a worn stair carpet ruins the whole job.
  • Get three quotes: and make sure each itemises carpet, underlay, fitting and extras separately so you can compare like with like.
  • Ask about offcuts: for small rooms, retailers sometimes sell end-of-roll pieces cheaply.

Frequently Asked Questions

How much carpet do I need for a 3-bed house?

A typical UK 3-bed needs 60–80m² of carpet including 5–10% wastage. Measure each room at its widest points, add it up, then add wastage — or ask the fitter to measure, which most do free when quoting.

Carpet fitter installing grey carpet with a stretcher tool and underlay in a UK home

Is it cheaper to carpet one room at a time?

Usually not. For example, fitters charge a minimum call-out, so doing the whole house at once spreads the labour cost. Doing rooms separately can cost 20–30% more overall — though it is easier on cash flow.

How long does it take to carpet a 3-bed house?

Typically 1–2 days for a professional team: one day for bedrooms and living areas, plus extra time for stairs and landings. In addition, add time if old flooring needs uplifting.

Should I replace the underlay when I replace carpet?

Yes, almost always. In addition, old underlay is compressed, may smell, and reusing it can void the new carpet’s warranty. As a result, budget for new underlay in every quote.

Carpeted staircase and landing with light grey carpet in a UK three-bedroom house

What is the cheapest way to carpet a house?

Budget polyester carpet with standard underlay, fitted in straightforward rooms, with you doing the uplift and furniture moving. Expect around £1,200–£1,800 for a 3-bed — but budget carpet in high-traffic areas will need replacing sooner.

How much does it cost to carpet a 2-bed house?

For example, typically £1,100–£2,600 supplied and fitted, depending on carpet grade — see the house-size table above. A 2-bed usually needs 45–60m² of carpet including wastage.

How much does it cost to carpet a 4-bed house?

Typically £1,900–£4,500 supplied and fitted. A 4-bed usually needs 75–100m², and a second staircase or larger landing pushes the price up — see the house-size table above.

How much does it cost to carpet stairs?

For example, a straight flight typically costs £180–£300 for carpet, underlay and fitting. Stairs and landing together usually add £350–£600 to a whole-house quote. Winding stairs and bullnose steps cost more.

How much is carpet fitting only?

Typically £3–£7/m² for labour, with a minimum call-out (often £40–£60). In addition, underlay, old-carpet uplift and furniture moving are normally extra.

The Bottom Line

Budget £1,500–£3,500 for a 3-bed house and spend the money where it counts: decent underlay, a proper stair carpet, and a fitter with good reviews. The cheapest quote is rarely the cheapest carpet in the long run. For the wider picture — laminate, LVT, wood and more — see our complete UK flooring guide.

Avatar photo

Erica

Erica is a home improvement writer covering refurbishment, renovation, and interiors for UK homeowners. Her guides focus on practical, step-by-step advice — from planning a kitchen or bathroom refit to choosing heating, storage, and finishes that suit British homes.

View all posts by Erica →